Deso Block Heat Insulation Wall System Images

Deso Block Heat Insulation Wall System

Deso-Block, is a composit type wall system produced with coat GRC XPS/Rockwool.

Deso-Block panel, has a composit structure and is a light facing panel.

The outer surface is a fibre reinforced concrete produced in 10-15 mm width and in the demanded form, colour and pattern. GRC coat, becomes a panel in the required system with a steel girder in the production phase. Deso-Block panel is obtained from this coat panel which was produced with a rockwool of 5 cm width or by using XPS and whose technical properties are written below.

When the costs of facing coating are added into the costs and workmanship of jacketting of walling and facing coating, loss of the time, workmanship, cash in the buildings can be reduced dramatically. Deso-Block heat insulation wall system can remove all the required application with a single block panel without requiring jacketting for your walling. When compared to the common jacketting systems, it ensures a higher heat insulation and ensures an incompatible heat saving thanks to the polyurethane and pumice aggregated concrete it includes. In addition, owing to its mobile anchorage system, it is an earthquake resistant wall system.

When suspended to the floorings and girders, it does not creat a load on the building and does not create a load accumulation between the walls. It helps you perform all the tasks with a cage, wall manufacture, coating and side plating in single operation. Since they are all produced specially for the building, the details will be adopted according to the characteristic of the building.

Width

The required heat, sound and water insulation with a panel width between 15 and 18 cm. For the width of 15-18, the unit range will be 55-60 kg/m2. This is 4 times lighter than the classical system in the building facings.

Size / Lightness

The panel sizes to be formed according to the project can be produced up to 5mt. Panels with the area of 15 m2 can be produced.

Heat insulation

Heat insulation with the panel whose width is15-18 can ensure 4 times more heat insulation than the common block panel systems at K=2.7 K.cal/m2 °C / In addition it is 2 times lighter than the common block panels.

Water insulation

Sealed system formed vertically and horizontally can shut itself down and can ensure maximum water insulation. 35 dB sound insulation can be made at 500 Hz.

Area Reclamation

As the Deso-Block panels are suspended to the flooring concretes from the floor and the ground over outer facing , the loss of area in the internal volume can be eliminated.

Form Easiness

As the materials are moulded, all kinds of patterns and colour can be used. It creates high detail easiness and solutions the building.